First steps with Datasets
Setting up the environment
To install in memory Datasets package , simply, use the following commands inside a Julia session:
julia> using Pkg
julia> Pkg.add("InMemoryDatasets")Throughout the rest of the tutorial we will assume that you have installed the "In-Memory Datasets" package and have already typed using InMemoryDatasets which loads the package:
julia> using InMemoryDatasetsCreating a data set
To create a data set, use Dataset(). For example
julia> ds = Dataset(var1 = [1, 2, 3],
var2 = [1.2, 0.5, 3.3],
var3 = ["C1", "C2", "C3"])
3×3 Dataset
Row │ var1 var2 var3
│ identity identity identity
│ Int64? Float64? String?
─────┼────────────────────────────────
1 │ 1 1.2 C1
2 │ 2 0.5 C2
3 │ 3 3.3 C3The first line of the output provides the general information about the data set. A data set is shown as a table in Julia, where each column represents a variable in the data set. The header section of the table shows three pieces of information for each column (variable), the column's name, the column's format, and the column's data type. The format of a column controls how the values of a column should be shown or interpreted when working with a data set.
The following example shows how to create a data set by providing a range of values.
julia> Dataset(A=1:3, B=5:7, fixed=1)
3×3 Dataset
Row │ A B fixed
│ identity identity identity
│ Int64? Int64? Int64?
─────┼──────────────────────────────
1 │ 1 5 1
2 │ 2 6 1
3 │ 3 7 1Observe that using scalars for a column, like 1 for the column :fixed get automatically broadcasted to fill all rows of the created Dataset.
The missing values in Julia are declare as missing, and these values can also be an observation for a particular column, e.g.
julia> Dataset(a = [1.1, -10.0, missing], b = 1:3)
3×2 Dataset
Row │ a b
│ identity identity
│ Float64? Int64?
─────┼─────────────────────
1 │ 1.1 1
2 │ -10.0 2
3 │ missing 3Sometimes one needs to create a data set whose column names are not valid Julia identifiers. In such a case the following form where column names are passed as strings, and = is replaced by => is handy:
julia> Dataset("customer age" => [15, 20, 25],
"first name" => ["Ben", "Steve", "Jule"])
3×2 Dataset
Row │ customer age first name
│ identity identity
│ Int64? String?
────┼───────────────────────────
1 │ 15 Ben
2 │ 20 Steve
3 │ 25 JuleIt is also possible to construct a data set from the values of a matrix or a vector of vectors, e.g.
julia> Dataset([1 0; 2 0], :auto)
2×2 Dataset
Row │ x1 x2
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 1 0
2 │ 2 0
julia> Dataset([[1 ,2], [0, 0]], :auto)
2×2 Dataset
Row │ x1 x2
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 1 0
2 │ 2 0Note that the column names are generated automatically when :auto is set as the second argument.
Alternatively you can pass a vector of column names as a second argument to the Dataset:
julia> Dataset([1 0; 2 0], ["col1", "col2"])
2×2 Dataset
Row │ col1 col2
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 1 0
2 │ 2 0Basic utility functions
Getting meta information about a data set
To get information about a data set, use the content function. It provides meta information about a data set.
julia> ds = Dataset(g = [1, 1, 1, 2, 2],
x1_int = [0, 0, 1, missing, 2],
x2_int = [3, 2, 1, 3, -2],
x1_float = [1.2, missing, -1.0, 2.3, 10],
x2_float = [missing, missing, 3.0, missing, missing],
x3_float = [missing, missing, -1.4, 3.0, -100.0])
5×6 Dataset
Row │ g x1_int x2_int x1_float x2_float x3_float
│ identity identity identity identity identity identity
│ Int64? Int64? Int64? Float64? Float64? Float64?
─────┼───────────────────────────────────────────────────────────────
1 │ 1 0 3 1.2 missing missing
2 │ 1 0 2 missing missing missing
3 │ 1 1 1 -1.0 3.0 -1.4
4 │ 2 missing 3 2.3 missing 3.0
5 │ 2 2 -2 10.0 missing -100.0
julia> content(ds)
5×6 Dataset
Created: 2021-08-04T13:11:53.743
Modified: 2021-08-04T13:11:53.743
Info:
-----------------------------------
Variables information
┌──────────┬──────────┬─────────┐
│ var │ format │ eltype │
├──────────┼──────────┼─────────┤
│ g │ identity │ Int64 │
│ x1_int │ identity │ Int64 │
│ x2_int │ identity │ Int64 │
│ x1_float │ identity │ Float64 │
│ x2_float │ identity │ Float64 │
│ x3_float │ identity │ Float64 │
└──────────┴──────────┴─────────┘content shows that the data set has 5 rows and 6 columns. It also shows when the data set has been created and when is the last time that it has been modified. The content function also reports the data type and formats of each variable.
The Info field is a string field which can contain any information related to the data set. To set an Info for a data set, use setinfo!, e.g.
julia> setinfo!(ds, "An example from the manual")
"An example from the manual"This information will be attached to the data set ds. Use getinfo to enquiry this information.
Setting and removing formats
To set a specific format for a column of a data set use setformat! function, e.g.
julia> ds = Dataset(x = 1:10,
y = repeat(1:5, inner = 2),
z = repeat(1:2, 5))
10×3 Dataset
Row │ x y z
│ identity identity identity
│ Int64? Int64? Int64?
─────┼──────────────────────────────
1 │ 1 1 1
2 │ 2 1 2
3 │ 3 2 1
4 │ 4 2 2
5 │ 5 3 1
6 │ 6 3 2
7 │ 7 4 1
8 │ 8 4 2
9 │ 9 5 1
10 │ 10 5 2
julia> setformat!(ds, :y => sqrt)
10×3 Dataset
Row │ x y z
│ identity sqrt identity
│ Int64? Int64? Int64?
─────┼─────────────────────────────
1 │ 1 1.0 1
2 │ 2 1.0 2
3 │ 3 1.41421 1
4 │ 4 1.41421 2
5 │ 5 1.73205 1
6 │ 6 1.73205 2
7 │ 7 2.0 1
8 │ 8 2.0 2
9 │ 9 2.23607 1
10 │ 10 2.23607 2The first argument for setformat! is the data set which needs to be modified and the second argument is the name of column, =>, and a named function. In the above example, we assign sqrt function as a format for the column :y.
Note that
setformat!doesn't check the validity of a format, so if an invalid format is assigned to a column, for instance assigningsqrtto a column which contains negative values, some functionality of data set will be parallelised (likeshowing the data set). In these cases, simply remove the invalid format by usingremoveformat!.
Let's define a function as a new format for column :z in the above example,
julia> function gender(x)
x == 1 ? "Male" : x == 2 ? "Female" : missing
endThe format gender accepts one value and if the value is equal to 1, gender maps it to "Male", if the value is equal to 2, it maps it to "Female", and for any other values it maps them to missing.
julia> setformat!(ds, :z => gender)
10×3 Dataset
Row │ x y z
│ identity sqrt gender
│ Int64? Int64? Int64?
─────┼───────────────────────────
1 │ 1 1.0 Male
2 │ 2 1.0 Female
3 │ 3 1.41421 Male
4 │ 4 1.41421 Female
5 │ 5 1.73205 Male
6 │ 6 1.73205 Female
7 │ 7 2.0 Male
8 │ 8 2.0 Female
9 │ 9 2.23607 Male
10 │ 10 2.23607 Femalethe removeformat! function should be used to remove a column's format.
julia> removeformat!(ds, :y)
10×3 Dataset
Row │ x y z
│ identity identity gender
│ Int64? Int64? Int64?
─────┼────────────────────────────
1 │ 1 1 Male
2 │ 2 1 Female
3 │ 3 2 Male
4 │ 4 2 Female
5 │ 5 3 Male
6 │ 6 3 Female
7 │ 7 4 Male
8 │ 8 4 Female
9 │ 9 5 Male
10 │ 10 5 FemaleSimilar to setformat! the first argument is the name of the data set and the second argument is the name of the column(s) which we want to remove its(their) format(s). Note that assigning or removing a format doesn't change the actual values of the column.
By default, formatted values of a column will be used when operations like displaying, sorting, grouping, or joining are called.
Accessing individual column or observation
ds[:, col], ds[i, col] can be used to access a specific column or specific observation of a specific column of ds, respectively. For example,
julia> ds = Dataset(x = [4,6,3], y = [1,2,43]);
julia> ds[:, :x]
3-element Vector{Union{Missing, Int64}}:
4
6
3
julia> ds[3, :y]
43Note that ds[:, col] extracts (copies) a column of a data set as a vector. Thus, this vector can be used as a normal vector in Julia.
Also note that, assigning a new value to ds[3, :y] will modify the data set, i.e.
julia> ds[3, :y] = 3
3
julia> ds
3×2 Dataset
Row │ x y
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 4 1
2 │ 6 2
3 │ 3 3
julia> content(ds)
3×2 Dataset
Created: 2021-08-04T13:18:51.185
Modified: 2021-08-04T13:24:33.086
Info:
-----------------------------------
Variables information
┌─────┬──────────┬────────┐
│ var │ format │ eltype │
├─────┼──────────┼────────┤
│ x │ identity │ Int64 │
│ y │ identity │ Int64 │
└─────┴──────────┴────────┘The content function shows that the data set has been created on 2021-08-04T13:18:51.185, and the last time that it has been modified is on 2021-08-04T13:24:33.086.
Adding a new column
To add a new column (variable) to a data set use ds.newvar or ds[:, :newvar] syntax,
julia> ds = Dataset(var1 = [1, 2, 3])
3×1 Dataset
Row │ var1
│ identity
│ Int64?
─────┼──────────
1 │ 1
2 │ 2
3 │ 3
julia> ds.var2 = ["val1", "val2", "val3"]
3-element Vector{String}:
"val1"
"val2"
"val3"
julia> ds
3×2 Dataset
Row │ var1 var2
│ identity identity
│ Int64? String?
─────┼──────────────────────
1 │ 1 val1
2 │ 2 val2
3 │ 3 val3
julia> ds[:, :var3] = [3.5, 4.6, 32.0]
3-element Vector{Float64}:
3.5
4.6
32.0
julia> ds
3×3 Dataset
Row │ var1 var2 var3
│ identity identity identity
│ Int64? String? Float64?
─────┼────────────────────────────────
1 │ 1 val1 3.5
2 │ 2 val2 4.6
3 │ 3 val3 32.0Beware that, when adding a new column to a data set, using the above syntax, if the column already exists in the data set it will be replaced by the new one.
Some useful functions
The following functions are very handy when working with a data set, for more information look at the package documentation. Note that functions which end with ! modify the original data set.
names(ds)gives the column names as a vector of string.size(ds)prints the data set dimension, i.e. number of rows and number of columnsnrow(ds)returns the number of rowsncol(ds)returns the number of columnsfilter/filter!filter data based onbyrowoperationfirst(ds, n)shows the firstnrows of a data setlast(ds, n)shows the lastnrows of a data setrename/rename!can be used to rename column namesselect/select!can be used to drop, select, or rearrange columnsdeleteat!deletes rows from a data setappend!(ds, tds)appendstdsat the end ofdsrepeat/repeat!repeats rows of a datasetunique/unique!filter unique rowsduplicatesfind duplicate rows
julia> test_data = Dataset(rand(1:10, 4, 3), :auto)
4×3 Dataset
Row │ x1 x2 x3
│ identity identity identity
│ Int64? Int64? Int64?
─────┼──────────────────────────────
1 │ 5 10 5
2 │ 3 8 10
3 │ 1 7 7
4 │ 2 6 5
julia> names(test_data)
3-element Vector{String}:
"x1"
"x2"
"x3"
julia> size(test_data)
(4, 3)
julia> nrow(test_data)
4
julia> ncol(test_data)
3
julia> first(test_data, 3)
3×3 Dataset
Row │ x1 x2 x3
│ identity identity identity
│ Int64? Int64? Int64?
─────┼──────────────────────────────
1 │ 5 10 5
2 │ 3 8 10
3 │ 1 7 7
julia> last(test_data, 2)
2×3 Dataset
Row │ x1 x2 x3
│ identity identity identity
│ Int64? Int64? Int64?
─────┼──────────────────────────────
1 │ 1 7 7
2 │ 2 6 5
julia> rename!(test_data, :x1 => :var1)
4×3 Dataset
Row │ var1 x2 x3
│ identity identity identity
│ Int64? Int64? Int64?
─────┼──────────────────────────────
1 │ 5 10 5
2 │ 3 8 10
3 │ 1 7 7
4 │ 2 6 5
julia> select!(test_data, :x2, :var1)
4×2 Dataset
Row │ x2 var1
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 10 5
2 │ 8 3
3 │ 7 1
4 │ 6 2
julia> test_data
4×2 Dataset
Row │ x2 var1
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 10 5
2 │ 8 3
3 │ 7 1
4 │ 6 2
julia> deleteat!(test_data, 2)
3×2 Dataset
Row │ x2 var1
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 10 5
2 │ 7 1
3 │ 6 2
julia> second_data = Dataset(var1 = [1, 3, 5, 6, 6],
x2 = [3, 4,5,6, 3])
5×2 Dataset
Row │ var1 x2
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 1 3
2 │ 3 4
3 │ 5 5
4 │ 6 6
5 │ 6 3
julia> append!(test_data, second_data)
8×2 Dataset
Row │ x2 var1
│ identity identity
│ Int64? Int64?
─────┼────────────────────
1 │ 10 5
2 │ 7 1
3 │ 6 2
4 │ 3 1
5 │ 4 3
6 │ 5 5
7 │ 6 6
8 │ 3 6