Introduction

UnROOT.jl

StableDevBuild StatusCodecov

UnROOT.jl is a (WIP) reader for the CERN ROOT file format written entirely in pure Julia, without no dependence on ROOT or Python.

While the ROOT documentation does not contain a detailed description of the binary structure, the format can be triangulated by other packages like

Here's a detailed from-scratch walk through on reading a jagged branch from .root file, recommdned for first time contributors or just want to learn about .root file format.

Three's also a discussion reagarding the ROOT binary format documentation on uproot's issue page.

Status

We support reading all scalar branch and jagged branch of "basic" types, provide indexing and iteration interface with per branch basket-cache. As a metric, UnROOT can read all branches (~1800) of CMS NanoAOD including jagged TLorentzVector branch.

Quick Start

The most easy way to access data is through LazyTree, which is <: AbstractDataFrame and a thin-wrap around TypedTable under the hood. It supports most accessing pattern from the loved DataFrames eco-system.

julia> using UnROOT

julia> f = ROOTFile("test/samples/NanoAODv5_sample.root")
ROOTFile with 2 entries and 21 streamers.
test/samples/NanoAODv5_sample.root
└─ Events
   ├─ "run"
   ├─ "luminosityBlock"
   ├─ "event"
   ├─ "HTXS_Higgs_pt"
   ├─ "HTXS_Higgs_y"
   └─ "⋮"

julia> mytree = LazyTree(f, "Events", ["Electron_dxy", "nMuon", r"Muon_(pt|eta)$"])
 Row │ Electron_dxy     nMuon   Muon_eta         Muon_pt
     │ Vector{Float32}  UInt32  Vector{Float32}  Vector{Float32}
─────┼───────────────────────────────────────────────────────────
 1   │ [0.000371]       0       []               []
 2   │ [-0.00982]       2       [0.53, 0.229]    [19.9, 15.3]
 3   │ []               0       []               []
 4   │ [-0.00157]       0       []               []
 ⋮   │     ⋮            ⋮             ⋮                ⋮
 
 
julia> mytree[1:3, :nMuon]
3-element Vector{UInt32}:
 0x00000000
 0x00000002
 0x00000000

You can iterate through a LazyTree:

julia> for event in mytree
           @show event.Electron_dxy
           break
       end
event.Electron_dxy = Float32[0.00037050247]

Only one basket per branch will be cached so you don't have to worry about running out or RAM. At the same time, event inside the for-loop is not materialized until a field is accessed. If your event is fairly small or you need all of them anyway, you can collect(event) first inside the loop.

Branch of custom struct

We provide an experimental interface for hooking up UnROOT with your custom types that only takes 2 steps, as explained here. As a show case for this functionality, the TLorentzVector support in UnROOT is implemented with the said plug-in system.

Alternatively, reading raw data is also possible using the UnROOT.array(f::ROOTFile, path; raw=true) method. The output can be then reinterpreted using a custom type with the method UnROOT.splitup(data, offsets, T::Type; skipbytes=0). This provides more fine grain control in case your branch is highly irregular. You can then define suitable Julia type and readtype method for parsing these data. Here is it in action, with the help of the types from custom.jl, and some data from the KM3NeT experiment:

julia> using UnROOT

julia> f = ROOTFile("test/samples/km3net_online.root")
ROOTFile("test/samples/km3net_online.root") with 10 entries and 41 streamers.

julia> data, offsets = array(f, "KM3NET_EVENT/KM3NET_EVENT/snapshotHits"; raw=true)
2058-element Array{UInt8,1}:
 0x00
 0x03
   ⋮
   
julia> UnROOT.splitup(data, offsets, UnROOT.KM3NETDAQHit)
4-element Vector{Vector{UnROOT.KM3NETDAQHit}}:
 [UnROOT.KM3NETDAQHit(1073742790, 0x00, 9, 0x60)......

Main challenges

Low hanging fruits

Pick one ;)

Acknowledgements

Special thanks to Jim Pivarski (@jpivarski) from the Scikit-HEP project, who is the main author of uproot, a native Python library to read and write ROOT files, which was and is a great source of inspiration and information for reverse engineering the ROOT binary structures.

Behind the scene

<details><summary>Some additional debug output: </summary> <p>

julia> using UnROOT

julia> f = ROOTFile("test/samples/tree_with_histos.root")
Compressed stream at 1509
ROOTFile("test/samples/tree_with_histos.root") with 1 entry and 4 streamers.

julia> keys(f)
1-element Array{String,1}:
 "t1"

julia> keys(f["t1"])
Compressed datastream of 1317 bytes at 1509 (TKey 't1' (TTree))
2-element Array{String,1}:
 "mynum"
 "myval"

julia> f["t1"]["mynum"]
Compressed datastream of 1317 bytes at 6180 (TKey 't1' (TTree))
UnROOT.TBranch
  cursor: UnROOT.Cursor
  fName: String "mynum"
  fTitle: String "mynum/I"
  fFillColor: Int16 0
  fFillStyle: Int16 1001
  fCompress: Int32 101
  fBasketSize: Int32 32000
  fEntryOffsetLen: Int32 0
  fWriteBasket: Int32 1
  fEntryNumber: Int64 25
  fIOFeatures: UnROOT.ROOT_3a3a_TIOFeatures
  fOffset: Int32 0
  fMaxBaskets: UInt32 0x0000000a
  fSplitLevel: Int32 0
  fEntries: Int64 25
  fFirstEntry: Int64 0
  fTotBytes: Int64 170
  fZipBytes: Int64 116
  fBranches: UnROOT.TObjArray
  fLeaves: UnROOT.TObjArray
  fBaskets: UnROOT.TObjArray
  fBasketBytes: Array{Int32}((10,)) Int32[116, 0, 0, 0, 0, 0, 0, 0, 0, 0]
  fBasketEntry: Array{Int64}((10,)) [0, 25, 0, 0, 0, 0, 0, 0, 0, 0]
  fBasketSeek: Array{Int64}((10,)) [238, 0, 0, 0, 0, 0, 0, 0, 0, 0]
  fFileName: String ""


julia> seek(f.fobj, 238)
IOStream(<file test/samples/tree_with_histos.root>)

julia> basketkey = UnROOT.unpack(f.fobj, UnROOT.TKey)
UnROOT.TKey64(116, 1004, 100, 0x6526eafb, 70, 0, 238, 100, "TBasket", "mynum", "t1")

julia> s = UnROOT.datastream(f.fobj, basketkey)
Compressed datastream of 100 bytes at 289 (TKey 'mynum' (TBasket))
IOBuffer(data=UInt8[...], readable=true, writable=false, seekable=true, append=false, size=100, maxsize=Inf, ptr=1, mark=-1)

julia> [UnROOT.readtype(s, Int32) for _ in 1:f["t1"]["mynum"].fEntries]
Compressed datastream of 1317 bytes at 6180 (TKey 't1' (TTree))
25-element Array{Int32,1}:
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 10
 10
 10
 10

</p> </details>