Route53Resolver

This page documents function available when using the Route53Resolver module, created with @service Route53Resolver.

Index

Documentation

Main.Route53Resolver.associate_firewall_rule_groupMethod
associate_firewall_rule_group(creator_request_id, firewall_rule_group_id, name, priority, vpc_id)
associate_firewall_rule_group(creator_request_id, firewall_rule_group_id, name, priority, vpc_id, params::Dict{String,<:Any})

Associates a FirewallRuleGroup with a VPC, to provide DNS filtering for the VPC.

Arguments

  • creator_request_id: A unique string that identifies the request and that allows failed requests to be retried without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.
  • firewall_rule_group_id: The unique identifier of the firewall rule group.
  • name: A name that lets you identify the association, to manage and use it.
  • priority: The setting that determines the processing order of the rule group among the rule groups that you associate with the specified VPC. DNS Firewall filters VPC traffic starting from the rule group with the lowest numeric priority setting. You must specify a unique priority for each rule group that you associate with a single VPC. To make it easier to insert rule groups later, leave space between the numbers, for example, use 101, 200, and so on. You can change the priority setting for a rule group association after you create it. The allowed values for Priority are between 100 and 9900.
  • vpc_id: The unique identifier of the VPC that you want to associate with the rule group.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MutationProtection": If enabled, this setting disallows modification or removal of the association, to help prevent against accidentally altering DNS firewall protections. When you create the association, the default setting is DISABLED.
  • "Tags": A list of the tag keys and values that you want to associate with the rule group association.
Main.Route53Resolver.associate_resolver_endpoint_ip_addressMethod
associate_resolver_endpoint_ip_address(ip_address, resolver_endpoint_id)
associate_resolver_endpoint_ip_address(ip_address, resolver_endpoint_id, params::Dict{String,<:Any})

Adds IP addresses to an inbound or an outbound Resolver endpoint. If you want to add more than one IP address, submit one AssociateResolverEndpointIpAddress request for each IP address. To remove an IP address from an endpoint, see DisassociateResolverEndpointIpAddress.

Arguments

  • ip_address: Either the IPv4 address that you want to add to a Resolver endpoint or a subnet ID. If you specify a subnet ID, Resolver chooses an IP address for you from the available IPs in the specified subnet.
  • resolver_endpoint_id: The ID of the Resolver endpoint that you want to associate IP addresses with.
Main.Route53Resolver.associate_resolver_query_log_configMethod
associate_resolver_query_log_config(resolver_query_log_config_id, resource_id)
associate_resolver_query_log_config(resolver_query_log_config_id, resource_id, params::Dict{String,<:Any})

Associates an Amazon VPC with a specified query logging configuration. Route 53 Resolver logs DNS queries that originate in all of the Amazon VPCs that are associated with a specified query logging configuration. To associate more than one VPC with a configuration, submit one AssociateResolverQueryLogConfig request for each VPC. The VPCs that you associate with a query logging configuration must be in the same Region as the configuration. To remove a VPC from a query logging configuration, see DisassociateResolverQueryLogConfig.

Arguments

  • resolver_query_log_config_id: The ID of the query logging configuration that you want to associate a VPC with.
  • resource_id: The ID of an Amazon VPC that you want this query logging configuration to log queries for. The VPCs and the query logging configuration must be in the same Region.
Main.Route53Resolver.associate_resolver_ruleMethod
associate_resolver_rule(resolver_rule_id, vpcid)
associate_resolver_rule(resolver_rule_id, vpcid, params::Dict{String,<:Any})

Associates a Resolver rule with a VPC. When you associate a rule with a VPC, Resolver forwards all DNS queries for the domain name that is specified in the rule and that originate in the VPC. The queries are forwarded to the IP addresses for the DNS resolvers that are specified in the rule. For more information about rules, see CreateResolverRule.

Arguments

  • resolver_rule_id: The ID of the Resolver rule that you want to associate with the VPC. To list the existing Resolver rules, use ListResolverRules.
  • vpcid: The ID of the VPC that you want to associate the Resolver rule with.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Name": A name for the association that you're creating between a Resolver rule and a VPC.
Main.Route53Resolver.create_firewall_domain_listMethod
create_firewall_domain_list(creator_request_id, name)
create_firewall_domain_list(creator_request_id, name, params::Dict{String,<:Any})

Creates an empty firewall domain list for use in DNS Firewall rules. You can populate the domains for the new list with a file, using ImportFirewallDomains, or with domain strings, using UpdateFirewallDomains.

Arguments

  • creator_request_id: A unique string that identifies the request and that allows you to retry failed requests without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.
  • name: A name that lets you identify the domain list to manage and use it.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Tags": A list of the tag keys and values that you want to associate with the domain list.
Main.Route53Resolver.create_firewall_ruleMethod
create_firewall_rule(action, creator_request_id, firewall_domain_list_id, firewall_rule_group_id, name, priority)
create_firewall_rule(action, creator_request_id, firewall_domain_list_id, firewall_rule_group_id, name, priority, params::Dict{String,<:Any})

Creates a single DNS Firewall rule in the specified rule group, using the specified domain list.

Arguments

  • action: The action that DNS Firewall should take on a DNS query when it matches one of the domains in the rule's domain list: ALLOW - Permit the request to go through. ALERT - Permit the request and send metrics and logs to Cloud Watch. BLOCK - Disallow the request. This option requires additional details in the rule's BlockResponse.
  • creator_request_id: A unique string that identifies the request and that allows you to retry failed requests without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.
  • firewall_domain_list_id: The ID of the domain list that you want to use in the rule.
  • firewall_rule_group_id: The unique identifier of the firewall rule group where you want to create the rule.
  • name: A name that lets you identify the rule in the rule group.
  • priority: The setting that determines the processing order of the rule in the rule group. DNS Firewall processes the rules in a rule group by order of priority, starting from the lowest setting. You must specify a unique priority for each rule in a rule group. To make it easier to insert rules later, leave space between the numbers, for example, use 100, 200, and so on. You can change the priority setting for the rules in a rule group at any time.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "BlockOverrideDnsType": The DNS record's type. This determines the format of the record value that you provided in BlockOverrideDomain. Used for the rule action BLOCK with a BlockResponse setting of OVERRIDE. This setting is required if the BlockResponse setting is OVERRIDE.
  • "BlockOverrideDomain": The custom DNS record to send back in response to the query. Used for the rule action BLOCK with a BlockResponse setting of OVERRIDE. This setting is required if the BlockResponse setting is OVERRIDE.
  • "BlockOverrideTtl": The recommended amount of time, in seconds, for the DNS resolver or web browser to cache the provided override record. Used for the rule action BLOCK with a BlockResponse setting of OVERRIDE. This setting is required if the BlockResponse setting is OVERRIDE.
  • "BlockResponse": The way that you want DNS Firewall to block the request, used with the rule action setting BLOCK. NODATA - Respond indicating that the query was successful, but no response is available for it. NXDOMAIN - Respond indicating that the domain name that's in the query doesn't exist. OVERRIDE - Provide a custom override in the response. This option requires custom handling details in the rule's BlockOverride* settings. This setting is required if the rule action setting is BLOCK.
Main.Route53Resolver.create_firewall_rule_groupMethod
create_firewall_rule_group(creator_request_id, name)
create_firewall_rule_group(creator_request_id, name, params::Dict{String,<:Any})

Creates an empty DNS Firewall rule group for filtering DNS network traffic in a VPC. You can add rules to the new rule group by calling CreateFirewallRule.

Arguments

  • creator_request_id: A unique string defined by you to identify the request. This allows you to retry failed requests without the risk of running the operation twice. This can be any unique string, for example, a timestamp.
  • name: A name that lets you identify the rule group, to manage and use it.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Tags": A list of the tag keys and values that you want to associate with the rule group.
Main.Route53Resolver.create_resolver_endpointMethod
create_resolver_endpoint(creator_request_id, direction, ip_addresses, security_group_ids)
create_resolver_endpoint(creator_request_id, direction, ip_addresses, security_group_ids, params::Dict{String,<:Any})

Creates a Resolver endpoint. There are two types of Resolver endpoints, inbound and outbound: An inbound Resolver endpoint forwards DNS queries to the DNS service for a VPC from your network. An outbound Resolver endpoint forwards DNS queries from the DNS service for a VPC to your network.

Arguments

  • creator_request_id: A unique string that identifies the request and that allows failed requests to be retried without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.
  • direction: Specify the applicable value: INBOUND: Resolver forwards DNS queries to the DNS service for a VPC from your network OUTBOUND: Resolver forwards DNS queries from the DNS service for a VPC to your network
  • ip_addresses: The subnets and IP addresses in your VPC that DNS queries originate from (for outbound endpoints) or that you forward DNS queries to (for inbound endpoints). The subnet ID uniquely identifies a VPC.
  • security_group_ids: The ID of one or more security groups that you want to use to control access to this VPC. The security group that you specify must include one or more inbound rules (for inbound Resolver endpoints) or outbound rules (for outbound Resolver endpoints). Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Name": A friendly name that lets you easily find a configuration in the Resolver dashboard in the Route 53 console.
  • "ResolverEndpointType": For the endpoint type you can choose either IPv4, IPv6. or dual-stack. A dual-stack endpoint means that it will resolve via both IPv4 and IPv6. This endpoint type is applied to all IP addresses.
  • "Tags": A list of the tag keys and values that you want to associate with the endpoint.
Main.Route53Resolver.create_resolver_query_log_configMethod
create_resolver_query_log_config(creator_request_id, destination_arn, name)
create_resolver_query_log_config(creator_request_id, destination_arn, name, params::Dict{String,<:Any})

Creates a Resolver query logging configuration, which defines where you want Resolver to save DNS query logs that originate in your VPCs. Resolver can log queries only for VPCs that are in the same Region as the query logging configuration. To specify which VPCs you want to log queries for, you use AssociateResolverQueryLogConfig. For more information, see AssociateResolverQueryLogConfig. You can optionally use Resource Access Manager (RAM) to share a query logging configuration with other Amazon Web Services accounts. The other accounts can then associate VPCs with the configuration. The query logs that Resolver creates for a configuration include all DNS queries that originate in all VPCs that are associated with the configuration.

Arguments

  • creator_request_id: A unique string that identifies the request and that allows failed requests to be retried without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.
  • destination_arn: The ARN of the resource that you want Resolver to send query logs. You can send query logs to an S3 bucket, a CloudWatch Logs log group, or a Kinesis Data Firehose delivery stream. Examples of valid values include the following: S3 bucket: arn:aws:s3:::examplebucket You can optionally append a file prefix to the end of the ARN. arn:aws:s3:::examplebucket/development/ CloudWatch Logs log group: arn:aws:logs:us-west-1:123456789012:log-group:/mystack-testgroup-12ABC1AB12A1:* Kinesis Data Firehose delivery stream: arn:aws:kinesis:us-east-2:0123456789:stream/mystreamname
  • name: The name that you want to give the query logging configuration.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Tags": A list of the tag keys and values that you want to associate with the query logging configuration.
Main.Route53Resolver.create_resolver_ruleMethod
create_resolver_rule(creator_request_id, domain_name, rule_type)
create_resolver_rule(creator_request_id, domain_name, rule_type, params::Dict{String,<:Any})

For DNS queries that originate in your VPCs, specifies which Resolver endpoint the queries pass through, one domain name that you want to forward to your network, and the IP addresses of the DNS resolvers in your network.

Arguments

  • creator_request_id: A unique string that identifies the request and that allows failed requests to be retried without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.
  • domain_name: DNS queries for this domain name are forwarded to the IP addresses that you specify in TargetIps. If a query matches multiple Resolver rules (example.com and www.example.com), outbound DNS queries are routed using the Resolver rule that contains the most specific domain name (www.example.com).
  • rule_type: When you want to forward DNS queries for specified domain name to resolvers on your network, specify FORWARD. When you have a forwarding rule to forward DNS queries for a domain to your network and you want Resolver to process queries for a subdomain of that domain, specify SYSTEM. For example, to forward DNS queries for example.com to resolvers on your network, you create a rule and specify FORWARD for RuleType. To then have Resolver process queries for apex.example.com, you create a rule and specify SYSTEM for RuleType. Currently, only Resolver can create rules that have a value of RECURSIVE for RuleType.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Name": A friendly name that lets you easily find a rule in the Resolver dashboard in the Route 53 console.
  • "ResolverEndpointId": The ID of the outbound Resolver endpoint that you want to use to route DNS queries to the IP addresses that you specify in TargetIps.
  • "Tags": A list of the tag keys and values that you want to associate with the endpoint.
  • "TargetIps": The IPs that you want Resolver to forward DNS queries to. You can specify only IPv4 addresses. Separate IP addresses with a space. TargetIps is available only when the value of Rule type is FORWARD.
Main.Route53Resolver.delete_firewall_domain_listMethod
delete_firewall_domain_list(firewall_domain_list_id)
delete_firewall_domain_list(firewall_domain_list_id, params::Dict{String,<:Any})

Deletes the specified domain list.

Arguments

  • firewall_domain_list_id: The ID of the domain list that you want to delete.
Main.Route53Resolver.delete_firewall_ruleMethod
delete_firewall_rule(firewall_domain_list_id, firewall_rule_group_id)
delete_firewall_rule(firewall_domain_list_id, firewall_rule_group_id, params::Dict{String,<:Any})

Deletes the specified firewall rule.

Arguments

  • firewall_domain_list_id: The ID of the domain list that's used in the rule.
  • firewall_rule_group_id: The unique identifier of the firewall rule group that you want to delete the rule from.
Main.Route53Resolver.delete_firewall_rule_groupMethod
delete_firewall_rule_group(firewall_rule_group_id)
delete_firewall_rule_group(firewall_rule_group_id, params::Dict{String,<:Any})

Deletes the specified firewall rule group.

Arguments

  • firewall_rule_group_id: The unique identifier of the firewall rule group that you want to delete.
Main.Route53Resolver.delete_resolver_endpointMethod
delete_resolver_endpoint(resolver_endpoint_id)
delete_resolver_endpoint(resolver_endpoint_id, params::Dict{String,<:Any})

Deletes a Resolver endpoint. The effect of deleting a Resolver endpoint depends on whether it's an inbound or an outbound Resolver endpoint: Inbound: DNS queries from your network are no longer routed to the DNS service for the specified VPC. Outbound: DNS queries from a VPC are no longer routed to your network.

Arguments

  • resolver_endpoint_id: The ID of the Resolver endpoint that you want to delete.
Main.Route53Resolver.delete_resolver_query_log_configMethod
delete_resolver_query_log_config(resolver_query_log_config_id)
delete_resolver_query_log_config(resolver_query_log_config_id, params::Dict{String,<:Any})

Deletes a query logging configuration. When you delete a configuration, Resolver stops logging DNS queries for all of the Amazon VPCs that are associated with the configuration. This also applies if the query logging configuration is shared with other Amazon Web Services accounts, and the other accounts have associated VPCs with the shared configuration. Before you can delete a query logging configuration, you must first disassociate all VPCs from the configuration. See DisassociateResolverQueryLogConfig. If you used Resource Access Manager (RAM) to share a query logging configuration with other accounts, you must stop sharing the configuration before you can delete a configuration. The accounts that you shared the configuration with can first disassociate VPCs that they associated with the configuration, but that's not necessary. If you stop sharing the configuration, those VPCs are automatically disassociated from the configuration.

Arguments

  • resolver_query_log_config_id: The ID of the query logging configuration that you want to delete.
Main.Route53Resolver.delete_resolver_ruleMethod
delete_resolver_rule(resolver_rule_id)
delete_resolver_rule(resolver_rule_id, params::Dict{String,<:Any})

Deletes a Resolver rule. Before you can delete a Resolver rule, you must disassociate it from all the VPCs that you associated the Resolver rule with. For more information, see DisassociateResolverRule.

Arguments

  • resolver_rule_id: The ID of the Resolver rule that you want to delete.
Main.Route53Resolver.disassociate_firewall_rule_groupMethod
disassociate_firewall_rule_group(firewall_rule_group_association_id)
disassociate_firewall_rule_group(firewall_rule_group_association_id, params::Dict{String,<:Any})

Disassociates a FirewallRuleGroup from a VPC, to remove DNS filtering from the VPC.

Arguments

  • firewall_rule_group_association_id: The identifier of the FirewallRuleGroupAssociation.
Main.Route53Resolver.disassociate_resolver_endpoint_ip_addressMethod
disassociate_resolver_endpoint_ip_address(ip_address, resolver_endpoint_id)
disassociate_resolver_endpoint_ip_address(ip_address, resolver_endpoint_id, params::Dict{String,<:Any})

Removes IP addresses from an inbound or an outbound Resolver endpoint. If you want to remove more than one IP address, submit one DisassociateResolverEndpointIpAddress request for each IP address. To add an IP address to an endpoint, see AssociateResolverEndpointIpAddress.

Arguments

  • ip_address: The IPv4 address that you want to remove from a Resolver endpoint.
  • resolver_endpoint_id: The ID of the Resolver endpoint that you want to disassociate an IP address from.
Main.Route53Resolver.disassociate_resolver_query_log_configMethod
disassociate_resolver_query_log_config(resolver_query_log_config_id, resource_id)
disassociate_resolver_query_log_config(resolver_query_log_config_id, resource_id, params::Dict{String,<:Any})

Disassociates a VPC from a query logging configuration. Before you can delete a query logging configuration, you must first disassociate all VPCs from the configuration. If you used Resource Access Manager (RAM) to share a query logging configuration with other accounts, VPCs can be disassociated from the configuration in the following ways: The accounts that you shared the configuration with can disassociate VPCs from the configuration. You can stop sharing the configuration.

Arguments

  • resolver_query_log_config_id: The ID of the query logging configuration that you want to disassociate a specified VPC from.
  • resource_id: The ID of the Amazon VPC that you want to disassociate from a specified query logging configuration.
Main.Route53Resolver.disassociate_resolver_ruleMethod
disassociate_resolver_rule(resolver_rule_id, vpcid)
disassociate_resolver_rule(resolver_rule_id, vpcid, params::Dict{String,<:Any})

Removes the association between a specified Resolver rule and a specified VPC. If you disassociate a Resolver rule from a VPC, Resolver stops forwarding DNS queries for the domain name that you specified in the Resolver rule.

Arguments

  • resolver_rule_id: The ID of the Resolver rule that you want to disassociate from the specified VPC.
  • vpcid: The ID of the VPC that you want to disassociate the Resolver rule from.
Main.Route53Resolver.get_firewall_configMethod
get_firewall_config(resource_id)
get_firewall_config(resource_id, params::Dict{String,<:Any})

Retrieves the configuration of the firewall behavior provided by DNS Firewall for a single VPC from Amazon Virtual Private Cloud (Amazon VPC).

Arguments

  • resource_id: The ID of the VPC from Amazon VPC that the configuration is for.
Main.Route53Resolver.get_firewall_domain_listMethod
get_firewall_domain_list(firewall_domain_list_id)
get_firewall_domain_list(firewall_domain_list_id, params::Dict{String,<:Any})

Retrieves the specified firewall domain list.

Arguments

  • firewall_domain_list_id: The ID of the domain list.
Main.Route53Resolver.get_firewall_rule_groupMethod
get_firewall_rule_group(firewall_rule_group_id)
get_firewall_rule_group(firewall_rule_group_id, params::Dict{String,<:Any})

Retrieves the specified firewall rule group.

Arguments

  • firewall_rule_group_id: The unique identifier of the firewall rule group.
Main.Route53Resolver.get_firewall_rule_group_associationMethod
get_firewall_rule_group_association(firewall_rule_group_association_id)
get_firewall_rule_group_association(firewall_rule_group_association_id, params::Dict{String,<:Any})

Retrieves a firewall rule group association, which enables DNS filtering for a VPC with one rule group. A VPC can have more than one firewall rule group association, and a rule group can be associated with more than one VPC.

Arguments

  • firewall_rule_group_association_id: The identifier of the FirewallRuleGroupAssociation.
Main.Route53Resolver.get_firewall_rule_group_policyMethod
get_firewall_rule_group_policy(arn)
get_firewall_rule_group_policy(arn, params::Dict{String,<:Any})

Returns the Identity and Access Management (Amazon Web Services IAM) policy for sharing the specified rule group. You can use the policy to share the rule group using Resource Access Manager (RAM).

Arguments

  • arn: The ARN (Amazon Resource Name) for the rule group.
Main.Route53Resolver.get_resolver_configMethod
get_resolver_config(resource_id)
get_resolver_config(resource_id, params::Dict{String,<:Any})

Retrieves the behavior configuration of Route 53 Resolver behavior for a single VPC from Amazon Virtual Private Cloud.

Arguments

  • resource_id: Resource ID of the Amazon VPC that you want to get information about.
Main.Route53Resolver.get_resolver_dnssec_configMethod
get_resolver_dnssec_config(resource_id)
get_resolver_dnssec_config(resource_id, params::Dict{String,<:Any})

Gets DNSSEC validation information for a specified resource.

Arguments

  • resource_id: The ID of the virtual private cloud (VPC) for the DNSSEC validation status.
Main.Route53Resolver.get_resolver_endpointMethod
get_resolver_endpoint(resolver_endpoint_id)
get_resolver_endpoint(resolver_endpoint_id, params::Dict{String,<:Any})

Gets information about a specified Resolver endpoint, such as whether it's an inbound or an outbound Resolver endpoint, and the current status of the endpoint.

Arguments

  • resolver_endpoint_id: The ID of the Resolver endpoint that you want to get information about.
Main.Route53Resolver.get_resolver_query_log_configMethod
get_resolver_query_log_config(resolver_query_log_config_id)
get_resolver_query_log_config(resolver_query_log_config_id, params::Dict{String,<:Any})

Gets information about a specified Resolver query logging configuration, such as the number of VPCs that the configuration is logging queries for and the location that logs are sent to.

Arguments

  • resolver_query_log_config_id: The ID of the Resolver query logging configuration that you want to get information about.
Main.Route53Resolver.get_resolver_query_log_config_associationMethod
get_resolver_query_log_config_association(resolver_query_log_config_association_id)
get_resolver_query_log_config_association(resolver_query_log_config_association_id, params::Dict{String,<:Any})

Gets information about a specified association between a Resolver query logging configuration and an Amazon VPC. When you associate a VPC with a query logging configuration, Resolver logs DNS queries that originate in that VPC.

Arguments

  • resolver_query_log_config_association_id: The ID of the Resolver query logging configuration association that you want to get information about.
Main.Route53Resolver.get_resolver_query_log_config_policyMethod
get_resolver_query_log_config_policy(arn)
get_resolver_query_log_config_policy(arn, params::Dict{String,<:Any})

Gets information about a query logging policy. A query logging policy specifies the Resolver query logging operations and resources that you want to allow another Amazon Web Services account to be able to use.

Arguments

  • arn: The ARN of the query logging configuration that you want to get the query logging policy for.
Main.Route53Resolver.get_resolver_ruleMethod
get_resolver_rule(resolver_rule_id)
get_resolver_rule(resolver_rule_id, params::Dict{String,<:Any})

Gets information about a specified Resolver rule, such as the domain name that the rule forwards DNS queries for and the ID of the outbound Resolver endpoint that the rule is associated with.

Arguments

  • resolver_rule_id: The ID of the Resolver rule that you want to get information about.
Main.Route53Resolver.get_resolver_rule_associationMethod
get_resolver_rule_association(resolver_rule_association_id)
get_resolver_rule_association(resolver_rule_association_id, params::Dict{String,<:Any})

Gets information about an association between a specified Resolver rule and a VPC. You associate a Resolver rule and a VPC using AssociateResolverRule.

Arguments

  • resolver_rule_association_id: The ID of the Resolver rule association that you want to get information about.
Main.Route53Resolver.get_resolver_rule_policyMethod
get_resolver_rule_policy(arn)
get_resolver_rule_policy(arn, params::Dict{String,<:Any})

Gets information about the Resolver rule policy for a specified rule. A Resolver rule policy includes the rule that you want to share with another account, the account that you want to share the rule with, and the Resolver operations that you want to allow the account to use.

Arguments

  • arn: The ID of the Resolver rule that you want to get the Resolver rule policy for.
Main.Route53Resolver.import_firewall_domainsMethod
import_firewall_domains(domain_file_url, firewall_domain_list_id, operation)
import_firewall_domains(domain_file_url, firewall_domain_list_id, operation, params::Dict{String,<:Any})

Imports domain names from a file into a domain list, for use in a DNS firewall rule group. Each domain specification in your domain list must satisfy the following requirements: It can optionally start with * (asterisk). With the exception of the optional starting asterisk, it must only contain the following characters: A-Z, a-z, 0-9, - (hyphen). It must be from 1-255 characters in length.

Arguments

  • domain_file_url: The fully qualified URL or URI of the file stored in Amazon Simple Storage Service (Amazon S3) that contains the list of domains to import. The file must be in an S3 bucket that's in the same Region as your DNS Firewall. The file must be a text file and must contain a single domain per line.
  • firewall_domain_list_id: The ID of the domain list that you want to modify with the import operation.
  • operation: What you want DNS Firewall to do with the domains that are listed in the file. This must be set to REPLACE, which updates the domain list to exactly match the list in the file.
Main.Route53Resolver.list_firewall_configsMethod
list_firewall_configs()
list_firewall_configs(params::Dict{String,<:Any})

Retrieves the firewall configurations that you have defined. DNS Firewall uses the configurations to manage firewall behavior for your VPCs. A single call might return only a partial list of the configurations. For information, see MaxResults.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MaxResults": The maximum number of objects that you want Resolver to return for this request. If more objects are available, in the response, Resolver provides a NextToken value that you can use in a subsequent call to get the next batch of objects. If you don't specify a value for MaxResults, Resolver returns up to 100 objects.
  • "NextToken": For the first call to this list request, omit this value. When you request a list of objects, Resolver returns at most the number of objects specified in MaxResults. If more objects are available for retrieval, Resolver returns a NextToken value in the response. To retrieve the next batch of objects, use the token that was returned for the prior request in your next request.
Main.Route53Resolver.list_firewall_domain_listsMethod
list_firewall_domain_lists()
list_firewall_domain_lists(params::Dict{String,<:Any})

Retrieves the firewall domain lists that you have defined. For each firewall domain list, you can retrieve the domains that are defined for a list by calling ListFirewallDomains. A single call to this list operation might return only a partial list of the domain lists. For information, see MaxResults.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MaxResults": The maximum number of objects that you want Resolver to return for this request. If more objects are available, in the response, Resolver provides a NextToken value that you can use in a subsequent call to get the next batch of objects. If you don't specify a value for MaxResults, Resolver returns up to 100 objects.
  • "NextToken": For the first call to this list request, omit this value. When you request a list of objects, Resolver returns at most the number of objects specified in MaxResults. If more objects are available for retrieval, Resolver returns a NextToken value in the response. To retrieve the next batch of objects, use the token that was returned for the prior request in your next request.
Main.Route53Resolver.list_firewall_domainsMethod
list_firewall_domains(firewall_domain_list_id)
list_firewall_domains(firewall_domain_list_id, params::Dict{String,<:Any})

Retrieves the domains that you have defined for the specified firewall domain list. A single call might return only a partial list of the domains. For information, see MaxResults.

Arguments

  • firewall_domain_list_id: The ID of the domain list whose domains you want to retrieve.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MaxResults": The maximum number of objects that you want Resolver to return for this request. If more objects are available, in the response, Resolver provides a NextToken value that you can use in a subsequent call to get the next batch of objects. If you don't specify a value for MaxResults, Resolver returns up to 100 objects.
  • "NextToken": For the first call to this list request, omit this value. When you request a list of objects, Resolver returns at most the number of objects specified in MaxResults. If more objects are available for retrieval, Resolver returns a NextToken value in the response. To retrieve the next batch of objects, use the token that was returned for the prior request in your next request.
Main.Route53Resolver.list_firewall_rule_group_associationsMethod
list_firewall_rule_group_associations()
list_firewall_rule_group_associations(params::Dict{String,<:Any})

Retrieves the firewall rule group associations that you have defined. Each association enables DNS filtering for a VPC with one rule group. A single call might return only a partial list of the associations. For information, see MaxResults.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "FirewallRuleGroupId": The unique identifier of the firewall rule group that you want to retrieve the associations for. Leave this blank to retrieve associations for any rule group.
  • "MaxResults": The maximum number of objects that you want Resolver to return for this request. If more objects are available, in the response, Resolver provides a NextToken value that you can use in a subsequent call to get the next batch of objects. If you don't specify a value for MaxResults, Resolver returns up to 100 objects.
  • "NextToken": For the first call to this list request, omit this value. When you request a list of objects, Resolver returns at most the number of objects specified in MaxResults. If more objects are available for retrieval, Resolver returns a NextToken value in the response. To retrieve the next batch of objects, use the token that was returned for the prior request in your next request.
  • "Priority": The setting that determines the processing order of the rule group among the rule groups that are associated with a single VPC. DNS Firewall filters VPC traffic starting from the rule group with the lowest numeric priority setting.
  • "Status": The association Status setting that you want DNS Firewall to filter on for the list. If you don't specify this, then DNS Firewall returns all associations, regardless of status.
  • "VpcId": The unique identifier of the VPC that you want to retrieve the associations for. Leave this blank to retrieve associations for any VPC.
Main.Route53Resolver.list_firewall_rule_groupsMethod
list_firewall_rule_groups()
list_firewall_rule_groups(params::Dict{String,<:Any})

Retrieves the minimal high-level information for the rule groups that you have defined. A single call might return only a partial list of the rule groups. For information, see MaxResults.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MaxResults": The maximum number of objects that you want Resolver to return for this request. If more objects are available, in the response, Resolver provides a NextToken value that you can use in a subsequent call to get the next batch of objects. If you don't specify a value for MaxResults, Resolver returns up to 100 objects.
  • "NextToken": For the first call to this list request, omit this value. When you request a list of objects, Resolver returns at most the number of objects specified in MaxResults. If more objects are available for retrieval, Resolver returns a NextToken value in the response. To retrieve the next batch of objects, use the token that was returned for the prior request in your next request.
Main.Route53Resolver.list_firewall_rulesMethod
list_firewall_rules(firewall_rule_group_id)
list_firewall_rules(firewall_rule_group_id, params::Dict{String,<:Any})

Retrieves the firewall rules that you have defined for the specified firewall rule group. DNS Firewall uses the rules in a rule group to filter DNS network traffic for a VPC. A single call might return only a partial list of the rules. For information, see MaxResults.

Arguments

  • firewall_rule_group_id: The unique identifier of the firewall rule group that you want to retrieve the rules for.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Action": Optional additional filter for the rules to retrieve. The action that DNS Firewall should take on a DNS query when it matches one of the domains in the rule's domain list: ALLOW - Permit the request to go through. ALERT - Permit the request to go through but send an alert to the logs. BLOCK - Disallow the request. If this is specified, additional handling details are provided in the rule's BlockResponse setting.
  • "MaxResults": The maximum number of objects that you want Resolver to return for this request. If more objects are available, in the response, Resolver provides a NextToken value that you can use in a subsequent call to get the next batch of objects. If you don't specify a value for MaxResults, Resolver returns up to 100 objects.
  • "NextToken": For the first call to this list request, omit this value. When you request a list of objects, Resolver returns at most the number of objects specified in MaxResults. If more objects are available for retrieval, Resolver returns a NextToken value in the response. To retrieve the next batch of objects, use the token that was returned for the prior request in your next request.
  • "Priority": Optional additional filter for the rules to retrieve. The setting that determines the processing order of the rules in a rule group. DNS Firewall processes the rules in a rule group by order of priority, starting from the lowest setting.
Main.Route53Resolver.list_resolver_configsMethod
list_resolver_configs()
list_resolver_configs(params::Dict{String,<:Any})

Retrieves the Resolver configurations that you have defined. Route 53 Resolver uses the configurations to manage DNS resolution behavior for your VPCs.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MaxResults": The maximum number of Resolver configurations that you want to return in the response to a ListResolverConfigs request. If you don't specify a value for MaxResults, up to 100 Resolver configurations are returned.
  • "NextToken": (Optional) If the current Amazon Web Services account has more than MaxResults Resolver configurations, use NextToken to get the second and subsequent pages of results. For the first ListResolverConfigs request, omit this value. For the second and subsequent requests, get the value of NextToken from the previous response and specify that value for NextToken in the request.
Main.Route53Resolver.list_resolver_dnssec_configsMethod
list_resolver_dnssec_configs()
list_resolver_dnssec_configs(params::Dict{String,<:Any})

Lists the configurations for DNSSEC validation that are associated with the current Amazon Web Services account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Filters": An optional specification to return a subset of objects.
  • "MaxResults": Optional: An integer that specifies the maximum number of DNSSEC configuration results that you want Amazon Route 53 to return. If you don't specify a value for MaxResults, Route 53 returns up to 100 configuration per page.
  • "NextToken": (Optional) If the current Amazon Web Services account has more than MaxResults DNSSEC configurations, use NextToken to get the second and subsequent pages of results. For the first ListResolverDnssecConfigs request, omit this value. For the second and subsequent requests, get the value of NextToken from the previous response and specify that value for NextToken in the request.
Main.Route53Resolver.list_resolver_endpoint_ip_addressesMethod
list_resolver_endpoint_ip_addresses(resolver_endpoint_id)
list_resolver_endpoint_ip_addresses(resolver_endpoint_id, params::Dict{String,<:Any})

Gets the IP addresses for a specified Resolver endpoint.

Arguments

  • resolver_endpoint_id: The ID of the Resolver endpoint that you want to get IP addresses for.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MaxResults": The maximum number of IP addresses that you want to return in the response to a ListResolverEndpointIpAddresses request. If you don't specify a value for MaxResults, Resolver returns up to 100 IP addresses.
  • "NextToken": For the first ListResolverEndpointIpAddresses request, omit this value. If the specified Resolver endpoint has more than MaxResults IP addresses, you can submit another ListResolverEndpointIpAddresses request to get the next group of IP addresses. In the next request, specify the value of NextToken from the previous response.
Main.Route53Resolver.list_resolver_endpointsMethod
list_resolver_endpoints()
list_resolver_endpoints(params::Dict{String,<:Any})

Lists all the Resolver endpoints that were created using the current Amazon Web Services account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Filters": An optional specification to return a subset of Resolver endpoints, such as all inbound Resolver endpoints. If you submit a second or subsequent ListResolverEndpoints request and specify the NextToken parameter, you must use the same values for Filters, if any, as in the previous request.
  • "MaxResults": The maximum number of Resolver endpoints that you want to return in the response to a ListResolverEndpoints request. If you don't specify a value for MaxResults, Resolver returns up to 100 Resolver endpoints.
  • "NextToken": For the first ListResolverEndpoints request, omit this value. If you have more than MaxResults Resolver endpoints, you can submit another ListResolverEndpoints request to get the next group of Resolver endpoints. In the next request, specify the value of NextToken from the previous response.
Main.Route53Resolver.list_resolver_query_log_config_associationsMethod
list_resolver_query_log_config_associations()
list_resolver_query_log_config_associations(params::Dict{String,<:Any})

Lists information about associations between Amazon VPCs and query logging configurations.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Filters": An optional specification to return a subset of query logging associations. If you submit a second or subsequent ListResolverQueryLogConfigAssociations request and specify the NextToken parameter, you must use the same values for Filters, if any, as in the previous request.
  • "MaxResults": The maximum number of query logging associations that you want to return in the response to a ListResolverQueryLogConfigAssociations request. If you don't specify a value for MaxResults, Resolver returns up to 100 query logging associations.
  • "NextToken": For the first ListResolverQueryLogConfigAssociations request, omit this value. If there are more than MaxResults query logging associations that match the values that you specify for Filters, you can submit another ListResolverQueryLogConfigAssociations request to get the next group of associations. In the next request, specify the value of NextToken from the previous response.
  • "SortBy": The element that you want Resolver to sort query logging associations by. If you submit a second or subsequent ListResolverQueryLogConfigAssociations request and specify the NextToken parameter, you must use the same value for SortBy, if any, as in the previous request. Valid values include the following elements: CreationTime: The ID of the query logging association. Error: If the value of Status is FAILED, the value of Error indicates the cause: DESTINATIONNOTFOUND: The specified destination (for example, an Amazon S3 bucket) was deleted. ACCESS_DENIED: Permissions don't allow sending logs to the destination. If Status is a value other than FAILED, ERROR is null. Id: The ID of the query logging association ResolverQueryLogConfigId: The ID of the query logging configuration ResourceId: The ID of the VPC that is associated with the query logging configuration Status: The current status of the configuration. Valid values include the following: CREATING: Resolver is creating an association between an Amazon VPC and a query logging configuration. CREATED: The association between an Amazon VPC and a query logging configuration was successfully created. Resolver is logging queries that originate in the specified VPC. DELETING: Resolver is deleting this query logging association. FAILED: Resolver either couldn't create or couldn't delete the query logging association. Here are two common causes: The specified destination (for example, an Amazon S3 bucket) was deleted. Permissions don't allow sending logs to the destination.
  • "SortOrder": If you specified a value for SortBy, the order that you want query logging associations to be listed in, ASCENDING or DESCENDING. If you submit a second or subsequent ListResolverQueryLogConfigAssociations request and specify the NextToken parameter, you must use the same value for SortOrder, if any, as in the previous request.
Main.Route53Resolver.list_resolver_query_log_configsMethod
list_resolver_query_log_configs()
list_resolver_query_log_configs(params::Dict{String,<:Any})

Lists information about the specified query logging configurations. Each configuration defines where you want Resolver to save DNS query logs and specifies the VPCs that you want to log queries for.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Filters": An optional specification to return a subset of query logging configurations. If you submit a second or subsequent ListResolverQueryLogConfigs request and specify the NextToken parameter, you must use the same values for Filters, if any, as in the previous request.
  • "MaxResults": The maximum number of query logging configurations that you want to return in the response to a ListResolverQueryLogConfigs request. If you don't specify a value for MaxResults, Resolver returns up to 100 query logging configurations.
  • "NextToken": For the first ListResolverQueryLogConfigs request, omit this value. If there are more than MaxResults query logging configurations that match the values that you specify for Filters, you can submit another ListResolverQueryLogConfigs request to get the next group of configurations. In the next request, specify the value of NextToken from the previous response.
  • "SortBy": The element that you want Resolver to sort query logging configurations by. If you submit a second or subsequent ListResolverQueryLogConfigs request and specify the NextToken parameter, you must use the same value for SortBy, if any, as in the previous request. Valid values include the following elements: Arn: The ARN of the query logging configuration AssociationCount: The number of VPCs that are associated with the specified configuration CreationTime: The date and time that Resolver returned when the configuration was created CreatorRequestId: The value that was specified for CreatorRequestId when the configuration was created DestinationArn: The location that logs are sent to Id: The ID of the configuration Name: The name of the configuration OwnerId: The Amazon Web Services account number of the account that created the configuration ShareStatus: Whether the configuration is shared with other Amazon Web Services accounts or shared with the current account by another Amazon Web Services account. Sharing is configured through Resource Access Manager (RAM). Status: The current status of the configuration. Valid values include the following: CREATING: Resolver is creating the query logging configuration. CREATED: The query logging configuration was successfully created. Resolver is logging queries that originate in the specified VPC. DELETING: Resolver is deleting this query logging configuration. FAILED: Resolver either couldn't create or couldn't delete the query logging configuration. Here are two common causes: The specified destination (for example, an Amazon S3 bucket) was deleted. Permissions don't allow sending logs to the destination.
  • "SortOrder": If you specified a value for SortBy, the order that you want query logging configurations to be listed in, ASCENDING or DESCENDING. If you submit a second or subsequent ListResolverQueryLogConfigs request and specify the NextToken parameter, you must use the same value for SortOrder, if any, as in the previous request.
Main.Route53Resolver.list_resolver_rule_associationsMethod
list_resolver_rule_associations()
list_resolver_rule_associations(params::Dict{String,<:Any})

Lists the associations that were created between Resolver rules and VPCs using the current Amazon Web Services account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Filters": An optional specification to return a subset of Resolver rules, such as Resolver rules that are associated with the same VPC ID. If you submit a second or subsequent ListResolverRuleAssociations request and specify the NextToken parameter, you must use the same values for Filters, if any, as in the previous request.
  • "MaxResults": The maximum number of rule associations that you want to return in the response to a ListResolverRuleAssociations request. If you don't specify a value for MaxResults, Resolver returns up to 100 rule associations.
  • "NextToken": For the first ListResolverRuleAssociation request, omit this value. If you have more than MaxResults rule associations, you can submit another ListResolverRuleAssociation request to get the next group of rule associations. In the next request, specify the value of NextToken from the previous response.
Main.Route53Resolver.list_resolver_rulesMethod
list_resolver_rules()
list_resolver_rules(params::Dict{String,<:Any})

Lists the Resolver rules that were created using the current Amazon Web Services account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Filters": An optional specification to return a subset of Resolver rules, such as all Resolver rules that are associated with the same Resolver endpoint. If you submit a second or subsequent ListResolverRules request and specify the NextToken parameter, you must use the same values for Filters, if any, as in the previous request.
  • "MaxResults": The maximum number of Resolver rules that you want to return in the response to a ListResolverRules request. If you don't specify a value for MaxResults, Resolver returns up to 100 Resolver rules.
  • "NextToken": For the first ListResolverRules request, omit this value. If you have more than MaxResults Resolver rules, you can submit another ListResolverRules request to get the next group of Resolver rules. In the next request, specify the value of NextToken from the previous response.
Main.Route53Resolver.list_tags_for_resourceMethod
list_tags_for_resource(resource_arn)
list_tags_for_resource(resource_arn, params::Dict{String,<:Any})

Lists the tags that you associated with the specified resource.

Arguments

  • resource_arn: The Amazon Resource Name (ARN) for the resource that you want to list tags for.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MaxResults": The maximum number of tags that you want to return in the response to a ListTagsForResource request. If you don't specify a value for MaxResults, Resolver returns up to 100 tags.
  • "NextToken": For the first ListTagsForResource request, omit this value. If you have more than MaxResults tags, you can submit another ListTagsForResource request to get the next group of tags for the resource. In the next request, specify the value of NextToken from the previous response.
Main.Route53Resolver.put_firewall_rule_group_policyMethod
put_firewall_rule_group_policy(arn, firewall_rule_group_policy)
put_firewall_rule_group_policy(arn, firewall_rule_group_policy, params::Dict{String,<:Any})

Attaches an Identity and Access Management (Amazon Web Services IAM) policy for sharing the rule group. You can use the policy to share the rule group using Resource Access Manager (RAM).

Arguments

  • arn: The ARN (Amazon Resource Name) for the rule group that you want to share.
  • firewall_rule_group_policy: The Identity and Access Management (Amazon Web Services IAM) policy to attach to the rule group.
Main.Route53Resolver.put_resolver_query_log_config_policyMethod
put_resolver_query_log_config_policy(arn, resolver_query_log_config_policy)
put_resolver_query_log_config_policy(arn, resolver_query_log_config_policy, params::Dict{String,<:Any})

Specifies an Amazon Web Services account that you want to share a query logging configuration with, the query logging configuration that you want to share, and the operations that you want the account to be able to perform on the configuration.

Arguments

  • arn: The Amazon Resource Name (ARN) of the account that you want to share rules with.
  • resolver_query_log_config_policy: An Identity and Access Management policy statement that lists the query logging configurations that you want to share with another Amazon Web Services account and the operations that you want the account to be able to perform. You can specify the following operations in the Actions section of the statement: route53resolver:AssociateResolverQueryLogConfig route53resolver:DisassociateResolverQueryLogConfig route53resolver:ListResolverQueryLogConfigAssociations route53resolver:ListResolverQueryLogConfigs In the Resource section of the statement, you specify the ARNs for the query logging configurations that you want to share with the account that you specified in Arn.
Main.Route53Resolver.put_resolver_rule_policyMethod
put_resolver_rule_policy(arn, resolver_rule_policy)
put_resolver_rule_policy(arn, resolver_rule_policy, params::Dict{String,<:Any})

Specifies an Amazon Web Services rule that you want to share with another account, the account that you want to share the rule with, and the operations that you want the account to be able to perform on the rule.

Arguments

  • arn: The Amazon Resource Name (ARN) of the rule that you want to share with another account.
  • resolver_rule_policy: An Identity and Access Management policy statement that lists the rules that you want to share with another Amazon Web Services account and the operations that you want the account to be able to perform. You can specify the following operations in the Action section of the statement: route53resolver:GetResolverRule route53resolver:AssociateResolverRule route53resolver:DisassociateResolverRule route53resolver:ListResolverRules route53resolver:ListResolverRuleAssociations In the Resource section of the statement, specify the ARN for the rule that you want to share with another account. Specify the same ARN that you specified in Arn.
Main.Route53Resolver.tag_resourceMethod
tag_resource(resource_arn, tags)
tag_resource(resource_arn, tags, params::Dict{String,<:Any})

Adds one or more tags to a specified resource.

Arguments

  • resource_arn: The Amazon Resource Name (ARN) for the resource that you want to add tags to. To get the ARN for a resource, use the applicable Get or List command: GetResolverEndpoint GetResolverRule GetResolverRuleAssociation ListResolverEndpoints ListResolverRuleAssociations ListResolverRules
  • tags: The tags that you want to add to the specified resource.
Main.Route53Resolver.untag_resourceMethod
untag_resource(resource_arn, tag_keys)
untag_resource(resource_arn, tag_keys, params::Dict{String,<:Any})

Removes one or more tags from a specified resource.

Arguments

  • resource_arn: The Amazon Resource Name (ARN) for the resource that you want to remove tags from. To get the ARN for a resource, use the applicable Get or List command: GetResolverEndpoint GetResolverRule GetResolverRuleAssociation ListResolverEndpoints ListResolverRuleAssociations ListResolverRules
  • tag_keys: The tags that you want to remove to the specified resource.
Main.Route53Resolver.update_firewall_configMethod
update_firewall_config(firewall_fail_open, resource_id)
update_firewall_config(firewall_fail_open, resource_id, params::Dict{String,<:Any})

Updates the configuration of the firewall behavior provided by DNS Firewall for a single VPC from Amazon Virtual Private Cloud (Amazon VPC).

Arguments

  • firewall_fail_open: Determines how Route 53 Resolver handles queries during failures, for example when all traffic that is sent to DNS Firewall fails to receive a reply. By default, fail open is disabled, which means the failure mode is closed. This approach favors security over availability. DNS Firewall blocks queries that it is unable to evaluate properly. If you enable this option, the failure mode is open. This approach favors availability over security. DNS Firewall allows queries to proceed if it is unable to properly evaluate them. This behavior is only enforced for VPCs that have at least one DNS Firewall rule group association.
  • resource_id: The ID of the VPC that the configuration is for.
Main.Route53Resolver.update_firewall_domainsMethod
update_firewall_domains(domains, firewall_domain_list_id, operation)
update_firewall_domains(domains, firewall_domain_list_id, operation, params::Dict{String,<:Any})

Updates the firewall domain list from an array of domain specifications.

Arguments

  • domains: A list of domains to use in the update operation. There is a limit of 1000 domains per request. Each domain specification in your domain list must satisfy the following requirements: It can optionally start with * (asterisk). With the exception of the optional starting asterisk, it must only contain the following characters: A-Z, a-z, 0-9, - (hyphen). It must be from 1-255 characters in length.
  • firewall_domain_list_id: The ID of the domain list whose domains you want to update.
  • operation: What you want DNS Firewall to do with the domains that you are providing: ADD - Add the domains to the ones that are already in the domain list. REMOVE - Search the domain list for the domains and remove them from the list. REPLACE - Update the domain list to exactly match the list that you are providing.
Main.Route53Resolver.update_firewall_ruleMethod
update_firewall_rule(firewall_domain_list_id, firewall_rule_group_id)
update_firewall_rule(firewall_domain_list_id, firewall_rule_group_id, params::Dict{String,<:Any})

Updates the specified firewall rule.

Arguments

  • firewall_domain_list_id: The ID of the domain list to use in the rule.
  • firewall_rule_group_id: The unique identifier of the firewall rule group for the rule.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Action": The action that DNS Firewall should take on a DNS query when it matches one of the domains in the rule's domain list: ALLOW - Permit the request to go through. ALERT - Permit the request to go through but send an alert to the logs. BLOCK - Disallow the request. This option requires additional details in the rule's BlockResponse.
  • "BlockOverrideDnsType": The DNS record's type. This determines the format of the record value that you provided in BlockOverrideDomain. Used for the rule action BLOCK with a BlockResponse setting of OVERRIDE.
  • "BlockOverrideDomain": The custom DNS record to send back in response to the query. Used for the rule action BLOCK with a BlockResponse setting of OVERRIDE.
  • "BlockOverrideTtl": The recommended amount of time, in seconds, for the DNS resolver or web browser to cache the provided override record. Used for the rule action BLOCK with a BlockResponse setting of OVERRIDE.
  • "BlockResponse": The way that you want DNS Firewall to block the request. Used for the rule action setting BLOCK. NODATA - Respond indicating that the query was successful, but no response is available for it. NXDOMAIN - Respond indicating that the domain name that's in the query doesn't exist. OVERRIDE - Provide a custom override in the response. This option requires custom handling details in the rule's BlockOverride* settings.
  • "Name": The name of the rule.
  • "Priority": The setting that determines the processing order of the rule in the rule group. DNS Firewall processes the rules in a rule group by order of priority, starting from the lowest setting. You must specify a unique priority for each rule in a rule group. To make it easier to insert rules later, leave space between the numbers, for example, use 100, 200, and so on. You can change the priority setting for the rules in a rule group at any time.
Main.Route53Resolver.update_firewall_rule_group_associationMethod
update_firewall_rule_group_association(firewall_rule_group_association_id)
update_firewall_rule_group_association(firewall_rule_group_association_id, params::Dict{String,<:Any})

Changes the association of a FirewallRuleGroup with a VPC. The association enables DNS filtering for the VPC.

Arguments

  • firewall_rule_group_association_id: The identifier of the FirewallRuleGroupAssociation.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "MutationProtection": If enabled, this setting disallows modification or removal of the association, to help prevent against accidentally altering DNS firewall protections.
  • "Name": The name of the rule group association.
  • "Priority": The setting that determines the processing order of the rule group among the rule groups that you associate with the specified VPC. DNS Firewall filters VPC traffic starting from the rule group with the lowest numeric priority setting. You must specify a unique priority for each rule group that you associate with a single VPC. To make it easier to insert rule groups later, leave space between the numbers, for example, use 100, 200, and so on. You can change the priority setting for a rule group association after you create it.
Main.Route53Resolver.update_resolver_configMethod
update_resolver_config(autodefined_reverse_flag, resource_id)
update_resolver_config(autodefined_reverse_flag, resource_id, params::Dict{String,<:Any})

Updates the behavior configuration of Route 53 Resolver behavior for a single VPC from Amazon Virtual Private Cloud.

Arguments

  • autodefined_reverse_flag: Indicates whether or not the Resolver will create autodefined rules for reverse DNS lookups. This is enabled by default. Disabling this option will also affect EC2-Classic instances using ClassicLink. For more information, see ClassicLink in the Amazon EC2 guide. We are retiring EC2-Classic on August 15, 2022. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon EC2 guide and the blog EC2-Classic Networking is Retiring – Here’s How to Prepare. It can take some time for the status change to be completed.
  • resource_id: Resource ID of the Amazon VPC that you want to update the Resolver configuration for.
Main.Route53Resolver.update_resolver_dnssec_configMethod
update_resolver_dnssec_config(resource_id, validation)
update_resolver_dnssec_config(resource_id, validation, params::Dict{String,<:Any})

Updates an existing DNSSEC validation configuration. If there is no existing DNSSEC validation configuration, one is created.

Arguments

  • resource_id: The ID of the virtual private cloud (VPC) that you're updating the DNSSEC validation status for.
  • validation: The new value that you are specifying for DNSSEC validation for the VPC. The value can be ENABLE or DISABLE. Be aware that it can take time for a validation status change to be completed.
Main.Route53Resolver.update_resolver_endpointMethod
update_resolver_endpoint(resolver_endpoint_id)
update_resolver_endpoint(resolver_endpoint_id, params::Dict{String,<:Any})

Updates the name, or enpoint type for an inbound or an outbound Resolver endpoint. You can only update between IPV4 and DUALSTACK, IPV6 endpoint type can't be updated to other type.

Arguments

  • resolver_endpoint_id: The ID of the Resolver endpoint that you want to update.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

  • "Name": The name of the Resolver endpoint that you want to update.
  • "ResolverEndpointType": Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.
  • "UpdateIpAddresses": Updates the Resolver endpoint type to IpV4, Ipv6, or dual-stack.
Main.Route53Resolver.update_resolver_ruleMethod
update_resolver_rule(config, resolver_rule_id)
update_resolver_rule(config, resolver_rule_id, params::Dict{String,<:Any})

Updates settings for a specified Resolver rule. ResolverRuleId is required, and all other parameters are optional. If you don't specify a parameter, it retains its current value.

Arguments

  • config: The new settings for the Resolver rule.
  • resolver_rule_id: The ID of the Resolver rule that you want to update.